CRemConInterfaceSelector Class Reference

#include <remconinterfaceselector.h>

Link against: remconinterfacebase.lib

class CRemConInterfaceSelector : public CBase

Inherits from

CRemConInterfaceSelector

Public Member Functions
	~CRemConInterfaceSelector()
void	BulkError(TInt)
void	BulkReceiveComplete(TUid, TUint, const TDesC8 &)
void	BulkSessionConnectL()
IMPORT_C void	ConnectBearer(TRequestStatus &)
IMPORT_C TInt	ConnectBearerCancel()
IMPORT_C TBool	ControllerOpened()
IMPORT_C void	DisconnectBearer(TRequestStatus &)
IMPORT_C TInt	DisconnectBearerCancel()
void	Error(TInt)
IMPORT_C TInt	GetConnections(TSglQue< TRemConAddress > &)
IMPORT_C void	GoConnectionOrientedL(const TRemConAddress &)
IMPORT_C void	GoConnectionlessL()
IMPORT_C CRemConInterfaceSelector *	NewL()
IMPORT_C void	NotifyConnectionsChange(TRequestStatus &)
IMPORT_C TInt	NotifyConnectionsChangeCancel()
IMPORT_C void	OpenControllerL()
IMPORT_C void	OpenTargetL()
IMPORT_C void	OpenTargetL(TPlayerType, TPlayerSubType, const TDesC8 &)
void	ReceiveComplete(TUid, TUint, TRemConMessageSubType, const TRemConAddress &, const TDesC8 &, TRemConClientType)
IMPORT_C void	RegisterErrorObserver(MRemConErrorObserver *)
IMPORT_C void	RegisterInterfaceL(CRemConInterfaceBase &)
void	RegisterInterfaceL(CRemConInterfaceBase &, RRemConInterfaceFeatures &)
IMPORT_C void	Send(TRequestStatus &, TUid, TUint, TUint &, TRemConMessageType, const TDesC8 &)
IMPORT_C void	Send(TRequestStatus &, TUid, TUint, TUint &, TRemConMessageType, TRemConMessageSubType, const TDesC8 &)
IMPORT_C void	SendBulk(TRequestStatus &, TUid, TUint, const TDesC8 &)
IMPORT_C TInt	SendBulkCancel()
IMPORT_C TInt	SendBulkUnreliable(TUid, TUint, const TDesC8 &)
IMPORT_C TInt	SendCancel(TRemConMessageType)
IMPORT_C void	SendNotify(TRequestStatus &, TUid, TUint, TRemConMessageType, TRemConMessageSubType, const TDesC8 &)
IMPORT_C TInt	SendUnreliable(TUid, TUint, TRemConMessageType, const TDesC8 &)
IMPORT_C TInt	SendUnreliable(TUid, TUint, TRemConMessageType, TRemConMessageSubType, const TDesC8 &)
IMPORT_C TBool	TargetOpened()

Inherited Functions
	CBase::CBase()
	CBase::Delete(CBase *)
	CBase::Extension_(TUint,TAny &,TAny )
	CBase::operator new(TUint)
	CBase::operator new(TUint,TAny *)
	CBase::operator new(TUint,TLeave)
	CBase::operator new(TUint,TLeave,TUint)
	CBase::operator new(TUint,TUint)
	CBase::~CBase()

Detailed Description

CRemConInterfaceSelector is only instantiable via its NewL function. It is not derivable.

Constructor & Destructor Documentation

~CRemConInterfaceSelector ( )

IMPORT_C

~CRemConInterfaceSelector

(

)

Destructor.

Member Function Documentation

BulkError ( TInt )

void

BulkError

(

TInt

aError

)

Only called internally, by the Active Object which sucks messages out of RemCon Bulk Server. This is called in the case of a session error.

BulkReceiveComplete ( TUid, TUint, const TDesC8 & )

void	BulkReceiveComplete	(	TUid	aInterfaceUid,
			TUint	aOperationId,
			const TDesC8 &	aData
		)

Only called internally, by the Active Object which sucks messages out of RemCon. Note that the message type is not given- it is interpolated from the type of the session doing the receiving.

Parameter	Description
aInterfaceUid	Interface UID of the new message.
aOperationId	Operation ID of the new message.
aData	Data associated with the new message.

BulkSessionConnectL ( )

void

BulkSessionConnectL

(

)

Only called internally, by the Active Object which sucks messages out of RemCon (bulk server).

This should be run from the thread in which the bulk interfaces are to run.

ConnectBearer ( TRequestStatus & )

IMPORT_C void

ConnectBearer

(

TRequestStatus &

aStatus

)

Brings up a bearer-level connection. The controller session must already exist (use OpenControllerL) and be connection-oriented.

Parameter	Description
aStatus	TRequestStatus for asynchronous completion.

ConnectBearerCancel ( )

IMPORT_C TInt

ConnectBearerCancel

(

)

Cancels interest in the completion of a ConnectBearer request.

Returns: KErrNone.

ControllerOpened ( )

IMPORT_C TBool

ControllerOpened

(

)

const

To determine if a controller session has been opened.

Returns: EFalse if no session has been opened, ETrue otherwise.

DisconnectBearer ( TRequestStatus & )

IMPORT_C void

DisconnectBearer

(

TRequestStatus &

aStat

)

Destroys a bearer-level connection. The controller session must already exist (use OpenControllerL) and be connection-oriented.

DisconnectBearerCancel ( )

IMPORT_C TInt

DisconnectBearerCancel

(

)

Cancels interest in the completion of a DisconnectBearer request.

Returns: KErrNone.

Error ( TInt )

void

Error

(

TInt

aError

)

Only called internally, by the Active Object which sucks messages out of RemCon. This is called in the case of a session error.

GetConnections ( TSglQue< TRemConAddress > & )

IMPORT_C TInt

GetConnections

(

TSglQue< TRemConAddress > &

aConnections

)

Getter for the current set of connections in the system (not just those associated with this session). The client is responsible for cleaning up aConnections- the addresses will be on the heap.

Parameter	Description
aConnections	A collection of remote addresses, representing all the currently extant connections.

Returns: Error.

GoConnectionOrientedL ( const TRemConAddress & )

IMPORT_C void

GoConnectionOrientedL

(

const TRemConAddress &

aConnection

)

Makes the controller session (which must already exist- use OpenControllerL) connection-oriented.

Parameter	Description
aConnection	The remote to talk to.

GoConnectionlessL ( )

IMPORT_C void

GoConnectionlessL

(

)

Makes the controller session (which must already exist- use OpenControllerL) connectionless.

NewL ( )

IMPORT_C CRemConInterfaceSelector *

NewL

(

)

[static]

Factory method.

Returns: Ownership of a new CRemConInterfaceSelector.

NotifyConnectionsChange ( TRequestStatus & )

IMPORT_C void

NotifyConnectionsChange

(

TRequestStatus &

aStatus

)

Notification for changes in the set of connections.

Parameter	Description
aStatus	TRequestStatus for asynchronous completion.

NotifyConnectionsChangeCancel ( )

IMPORT_C TInt

NotifyConnectionsChangeCancel

(

)

Cancels interest in the completion of an outstanding NotifyConnectionsChange operation.

Returns: KErrNone.

OpenControllerL ( )

IMPORT_C void

OpenControllerL

(

)

Opens a controller session to RemCon. The session is connectionless until such time as GoConnectionOriented may be called.

leave: KErrInUse If a controller session is already open.

OpenTargetL ( )

IMPORT_C void

OpenTargetL

(

)

Opens a target session to RemCon.

leave: KErrInUse If a target session is already open.

OpenTargetL ( TPlayerType, TPlayerSubType, const TDesC8 & )

IMPORT_C void	OpenTargetL	(	TPlayerType	aPlayerType,
			TPlayerSubType	aPlayerSubType,
			const TDesC8 &	aPlayerName
		)

Opens a target session to RemCon.

leave: KErrInUse If a target session is already open.

Opens a target session to RemCon.

If any bulk interfaces have been registered on this interface selector the the thread in which the first bulk interface was created must be ready to run and not blocked waiting for the completion of this function. Failure to do so will lead to deadlock.

leave: KErrInUse If a target session is already open.

Parameter	Description
aPlayerType	The type of player
aPlayerSubType	The sub-type of the player
aPlayerName	The name of the player

ReceiveComplete ( TUid, TUint, TRemConMessageSubType, const TRemConAddress &, const TDesC8 &, TRemConClientType )

void	ReceiveComplete	(	TUid	aInterfaceUid,
			TUint	aOperationId,
			TRemConMessageSubType	aMsgSubType,
			const TRemConAddress &	aRemoteAddress,
			const TDesC8 &	aData,
			TRemConClientType	aType
		)

Only called internally, by the Active Object which sucks messages out of RemCon. Note that the message type is not given- it is interpolated from the type of the session doing the receiving.

Parameter	Description
aInterfaceUid	Interface UID of the new message.
aOperationId	Operation ID of the new message.
aMsgSubType	The message subtype.
aRemoteAddress	The address of the remote which sent the message.
aData	Data associated with the new message.
aType	The type of session which received the message (from which the type of the message can be interpolated).

RegisterErrorObserver ( MRemConErrorObserver * )

IMPORT_C void

RegisterErrorObserver

(

MRemConErrorObserver *

aObserver

)

Parameter	Description
aObserver	An error observer to be notified on a passive error. NULL to stop receiving notifications.

RegisterInterfaceL ( CRemConInterfaceBase & )

IMPORT_C void

RegisterInterfaceL

(

CRemConInterfaceBase &

aInterface

)

Register the interface with the selector. This is called by the interface's BaseConstructL. Takes ownership of aInterface. This function is not to be called outside of remconinterfacebase.dll. It is available for compatibility with previous versions, but it is intended to be called only by CRemConInterfaceBase::BaseConstructL. CRemConInterfaceBase-derived classes should indirectly perform a RegisterInterfaceL, by calling CRemConInterfaceBase::BaseConstructL from their construction functions.

Parameter	Description
aInterface	The interface.

RegisterInterfaceL ( CRemConInterfaceBase &, RRemConInterfaceFeatures & )

void	RegisterInterfaceL	(	CRemConInterfaceBase &	aInterface,
			RRemConInterfaceFeatures &	aRemConInterfaceFeatures
		)

Parameter	Description
aInterface	The interface.
aRemConInterfaceFeatures	The operation IDs of the interface. Ownership is retained by the caller. Any necessary data will be copied by the interface selector.

Send ( TRequestStatus &, TUid, TUint, TUint &, TRemConMessageType, const TDesC8 & )

IMPORT_C void	Send	(	TRequestStatus &	aStatus,
			TUid	aInterfaceUid,
			TUint	aOperationId,
			TUint &	aNumRemotes,
			TRemConMessageType	aMsgType,
			const TDesC8 &	aData = KNullDesC8()
		)

Sends a message to the remote device(s). There should be only one command and response outstanding at any one time. Send cannot be called again until aStatus is completed.

panic: RemConClient 4 If a send is already outstanding

Parameter	Description
aStatus	TRequestStatus for asynchronous completion.
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aNumRemotes	On success, the number of remotes the message was successfully sent to.
aMsgType	Whether the message is a command or a response.
aData	Any associated message data in interface-specific format.

Send ( TRequestStatus &, TUid, TUint, TUint &, TRemConMessageType, TRemConMessageSubType, const TDesC8 & )

IMPORT_C void	Send	(	TRequestStatus &	aStatus,
			TUid	aInterfaceUid,
			TUint	aOperationId,
			TUint &	aNumRemotes,
			TRemConMessageType	aMsgType,
			TRemConMessageSubType	aMsgSubType,
			const TDesC8 &	aData = KNullDesC8()
		)

Sends a message to the remote device(s).

Parameter	Description
aStatus	TRequestStatus for asynchronous completion.
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aNumRemotes	On success, the number of remotes the message was successfully sent to.
aMsgType	Whether the message is a command or a response.
aMsgSubType	The subtype of the command of response
aData	Any associated message data in interface-specific format.

SendBulk ( TRequestStatus &, TUid, TUint, const TDesC8 & )

IMPORT_C void	SendBulk	(	TRequestStatus &	aStatus,
			TUid	aInterfaceUid,
			TUint	aOperationId,
			const TDesC8 &	aData = KNullDesC8()
		)

This method is for internal sub-system use only and should be not be used otherwise. Sends a message to the remote device(s) through the bulk path. There should be only one response outstanding at any one time. Send cannot be called again until aStatus is completed.

panic: RemConClient 4 If a send is already outstanding

Parameter	Description
aStatus	TRequestStatus for asynchronous completion.
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aData	Any associated message data in interface-specific format.

SendBulkCancel ( )

IMPORT_C TInt

SendBulkCancel

(

)

This method is for internal sub-system use only and should be not be used otherwise. Cancels interest in the completion of a BulkSend request.

Returns: KErrNone.

SendBulkUnreliable ( TUid, TUint, const TDesC8 & )

IMPORT_C TInt	SendBulkUnreliable	(	TUid	aInterfaceUid,
			TUint	aOperationId,
			const TDesC8 &	aData = KNullDesC8()
		)

This method is for internal sub-system use only and should be not be used otherwise. Sends a message to the remote device(s) through the bulk path, without waiting for the send to complete.

Parameter	Description
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aData	Any associated message data in interface-specific format.

SendCancel ( TRemConMessageType )

IMPORT_C TInt

SendCancel

(

TRemConMessageType

aMsgType

)

Cancels interest in the completion of a Send request.

Parameter	Description
aMsgType	The type of the message, the completion of the send of which we are not interested in. This is needed because a single CRemConInterfaceSelector may have two sends outstanding at once, one on a controller session and another on a target session.

Returns: KErrNone.

SendNotify ( TRequestStatus &, TUid, TUint, TRemConMessageType, TRemConMessageSubType, const TDesC8 & )

IMPORT_C void	SendNotify	(	TRequestStatus &	aStatus,
			TUid	aInterfaceUid,
			TUint	aOperationId,
			TRemConMessageType	aMsgType,
			TRemConMessageSubType	aMsgSubType,
			const TDesC8 &	aData = KNullDesC8()
		)

Sends a

Sends a notify command to the remote device.

SendUnreliable ( TUid, TUint, TRemConMessageType, const TDesC8 & )

IMPORT_C TInt	SendUnreliable	(	TUid	aInterfaceUid,
			TUint	aOperationId,
			TRemConMessageType	aMsgType,
			const TDesC8 &	aData = KNullDesC8()
		)

This method is for internal sub-system use only and should be not be used otherwise. Sends a message to the remote device(s), without waiting for the send to complete

Parameter	Description
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aMsgType	Whether the message is a command or a response.
aData	Any associated message data in interface-specific format.

SendUnreliable ( TUid, TUint, TRemConMessageType, TRemConMessageSubType, const TDesC8 & )

IMPORT_C TInt	SendUnreliable	(	TUid	aInterfaceUid,
			TUint	aOperationId,
			TRemConMessageType	aMsgType,
			TRemConMessageSubType	aMsgSubType,
			const TDesC8 &	aData = KNullDesC8()
		)

This method is for internal sub-system use only and should be not be used otherwise. Sends a message to the remote device(s), without waiting for the send to complete

Parameter	Description
aInterfaceUid	The UID of the concrete (outer-layer) interface sending the message.
aOperationId	The interface-specific operation identifier.
aMsgType	Whether the message is a command or a response.
aMsgSubType	The subtype of the command of response
aData	Any associated message data in interface-specific format.

TargetOpened ( )

IMPORT_C TBool

TargetOpened

(

)

const

To determine if a target session has been opened.

Returns: EFalse if no session has been opened, ETrue otherwise.